Warne Tikka 1" Medium Matte Scope Rings
Warne
$71.99
(No reviews yet)
Write a Review
Warne
Warne Tikka 1" Medium Matte Scope Rings
The Warne Tikka 1" Medium Matte Rings deliver a precision-fit mounting solution engineered specifically for Tikka rifles, allowing you to mount a 1-inch riflescope directly to the receiver's dovetail without any additional base required.
- Tikka-specific design mounts directly to receiver dovetail — no base needed
- Dedicated recoil pin ensures positive, rock-solid engagement every shot
- Secures with four Torx-style T-15 socket cap screws for even clamping
- Recommended torque of 25 in/lb. protects scope tubes from over-tightening
- Matte black finish reduces glare and blends with most rifle profiles
- Medium height profile suits most standard objective lenses and barrels
Who This Is For
These rings are the ideal choice for Tikka rifle owners — including T3, T3x, and compatible models — who want a clean, low-profile scope mounting setup without the added cost or complexity of a separate Picatinny or Weaver base. Whether you're building a dedicated hunting rifle or a precision field gun, Warne's Tikka-specific rings provide the repeatable accuracy and durability serious shooters demand.
Specifications
| Brand | Warne |
|---|---|
| Ring Diameter | 1 Inch (25.4mm) |
| Height | Medium |
| Finish | Matte Black |
| Compatible Platform | Tikka Receiver Dovetail |
| Mounting Hardware | 4x Torx T-15 Socket Cap Screws |
| Recommended Torque | 25 in/lb. |
| Base Required | No — direct dovetail mount |
| Material | Steel |
Frequently Asked Questions
Which Tikka rifle models are these rings compatible with?
These Warne rings are designed to fit the Tikka proprietary dovetail receiver found on popular models such as the Tikka T3 and T3x series. If your Tikka features the factory dovetail on the receiver (rather than a Picatinny rail), these rings should mount directly without an additional base. Always verify your specific model's receiver style before purchasing.
Do I need a separate mounting base or rail to use these rings?
No — that's one of the key advantages of these Warne Tikka-specific rings. They are machined to interface directly with the Tikka receiver's proprietary dovetail, so no Picatinny or Weaver base is required. The integrated recoil pin locks into the dovetail for a secure, repeatable fit straight out of the box.
Will medium-height rings clear my scope's objective lens?
Medium-height rings are suitable for most standard hunting and tactical scopes with objective lenses up to approximately 42–44mm on a typical Tikka barrel contour. If you're running a larger objective (50mm+) or a heavy barrel profile, you may want to consider high rings to ensure adequate clearance. When in doubt, measure the distance from the centerline of the scope tube to the bottom of the objective bell before selecting ring height.
