Warne Tikka 30mm Scope Rings Medium Matte Black Mount
Warne
$75.99
(No reviews yet)
Write a Review
Warne
Warne Tikka 30mm Scope Rings Medium Matte Black Mount
The Warne Tikka 30mm Medium Matte Rings are precision-machined scope rings engineered specifically for Tikka rifles, allowing direct mounting to the receiver's dovetail without the need for a separate base — delivering a rock-solid, low-profile optics platform straight out of the box.
- Tikka-specific design mounts directly to receiver dovetail — no base required
- Dedicated recoil pin ensures positive, repeatable engagement with the dovetail
- 30mm ring diameter accommodates a wide range of modern rifle scopes
- Medium height profile balances objective clearance with a natural cheek weld
- Four Torx-style T-15 socket cap screws torqued to 25 in/lb. for consistent clamping
- Matte black finish reduces glare and blends seamlessly with tactical and hunting rifles
Who This Is For
These rings are the ideal choice for Tikka T3, T3x, and compatible rifle owners who want a clean, direct-mount optics solution without added height or hardware. Whether you're building a precision hunting setup or a long-range field rifle, the Warne Tikka 30mm Medium Matte Rings provide the repeatable accuracy and rugged durability that serious shooters demand.
Specifications
| Brand | Warne |
|---|---|
| Model | Tikka 30mm Medium Matte Rings |
| Ring Diameter | 30mm |
| Height | Medium |
| Finish | Matte Black |
| Mount Type | Direct Dovetail (No Base Required) |
| Compatible Rifles | Tikka T3, T3x, and compatible models |
| Fasteners | 4× Torx T-15 Socket Cap Screws |
| Torque Specification | 25 in/lb. |
| Material | Steel |
| Country of Origin | USA |
Frequently Asked Questions
Which Tikka rifle models are compatible with these rings?
These rings are designed for Tikka rifles that feature the proprietary Tikka dovetail receiver, most commonly the Tikka T3 and T3x series. Because the rings mount directly to the receiver's integral dovetail rail, no separate Picatinny or Weaver base is needed. If you are unsure whether your specific Tikka model is compatible, we recommend confirming the receiver style before purchasing.
What scope tube diameter and height do I need for my setup?
These rings are sized for scopes with a 30mm main tube diameter — be sure your optic matches this specification before ordering. The medium height is suitable for most standard objective lenses up to approximately 44–50mm, offering adequate clearance while maintaining a comfortable cheek weld. If you are running a larger objective lens or an angled forend, a high-profile ring may be more appropriate.
Do I need any special tools to install these rings?
Installation requires a T-15 Torx driver to tighten the four socket cap screws. Warne specifies a torque value of 25 in/lb., so using a torque wrench or torque screwdriver is strongly recommended to avoid under- or over-tightening. Proper torque ensures a secure hold without damaging the scope tube or ring body.
