Warne Tikka 1-Inch High Matte Scope Rings
Warne
$71.99
(No reviews yet)
Write a Review
Warne
Warne Tikka 1-Inch High Matte Scope Rings
The Warne Tikka 1" High Matte Rings deliver a precision-machined, no-base mounting solution engineered specifically for Tikka rifles, giving shooters a rock-solid optics platform straight out of the box.
- Machined to exacting tolerances for a perfect fit on Tikka dovetail receivers
- Mounts directly to the receiver — no separate base or adapter required
- Tikka-specific recoil pin ensures positive engagement and prevents scope shift
- Secured with four Torx T-15 socket cap screws for consistent, repeatable torque
- Recommended torque of 25 in/lb. protects scope tubes and maintains zero
- Matte finish reduces glare and complements tactical or hunting rifle setups
Who This Is For
These rings are the ideal choice for Tikka T3, T3x, and compatible rifle owners who want a clean, reliable scope mount without the added expense or complexity of a Picatinny base. Whether you're a deer hunter chasing first-light shots or a precision rimfire shooter demanding consistent zero retention, the Warne Tikka 1" High Matte Rings provide the confidence to take the shot when it matters most.
Specifications
| Brand | Warne |
|---|---|
| Ring Diameter | 1 Inch (25.4mm) |
| Height | High |
| Finish | Matte Black |
| Compatible Platform | Tikka Dovetail Receivers |
| Base Required | No — mounts directly to receiver |
| Fastener Type | Torx T-15 Socket Cap Screws |
| Number of Screws | 4 |
| Recommended Torque | 25 in/lb. |
| Recoil Pin | Yes — Tikka-specific |
| Material | Steel |
Frequently Asked Questions
Which Tikka rifle models are these rings compatible with?
Warne Tikka rings are designed to fit the proprietary dovetail found on Tikka T3 and T3x series rifles, as well as other Tikka models that share the same receiver dovetail profile. Because Tikka uses a unique mounting system, these rings mount directly without any additional base — always verify your specific model's receiver style before ordering.
Why is the "High" ring height important for my scope choice?
Ring height determines how much clearance exists between your scope's objective lens and the barrel. High rings are typically recommended for scopes with objective lenses of 44mm or larger, or when using a standard factory stock with a straight comb. If you're mounting a smaller objective scope or shooting from a custom cheek riser, medium rings may provide a better cheek weld — consult Warne's ring height guide if unsure.
What tool do I need to install these rings, and how tight should I torque them?
Installation requires a T-15 Torx driver, which is widely available at hardware stores and included in many gunsmithing tool kits. Warne specifies 25 in/lb. of torque on the cap screws — using a quality torque wrench or torque-limiting driver is strongly recommended to avoid over-tightening, which can crush the scope tube, or under-tightening, which may allow the scope to shift under recoil.
