Warne Maxima 1" High Matte Scope Rings
Warne
$51.99
(No reviews yet)
Write a Review
Warne
Warne Maxima 1" High Matte Scope Rings
The Warne Maxima 1" Hi Matte fixed scope rings deliver rock-solid optic retention for Weaver-style bases, combining precision engineering with heavy-duty recoil management to keep your zero shot after shot.
- Square stainless steel recoil control key ensures positive, no-slip ring-to-base engagement
- Dual front and rear recoil keys withstand the heaviest magnum and hard-kicking calibers
- Wide ring band maximizes clamping surface area for a firm, secure scope hold
- Protects softer base materials against swaging and peening under repeated recoil
- Four Torx T-15 socket cap screws with a recommended 25 in/lb torque for consistent installation
- Matte black finish reduces glare in the field for a clean, tactical aesthetic
Who This Is For
The Warne Maxima 1" Hi Matte rings are ideal for hunters, competitive shooters, and rifle enthusiasts who demand uncompromising optic stability on Weaver-style bases. Whether you're running a hard-recoiling magnum hunting rifle or a precision bolt gun, these rings are built to maintain zero under the most punishing conditions. The high-profile configuration provides the clearance needed for larger objective lenses or rifles with higher bore axes.
Specifications
| Brand | Warne |
|---|---|
| Series | Maxima Fixed Ring |
| Ring Diameter | 1 inch (25.4mm) |
| Height | High |
| Finish | Matte Black |
| Base Compatibility | Weaver-Style Cross Slot Bases |
| Recoil Key Material | Stainless Steel (Square Profile) |
| Fasteners | 4x Torx T-15 Socket Cap Screws |
| Recommended Torque | 25 in/lb |
| Ring Type | Fixed / Non-Detachable |
Frequently Asked Questions
Will these rings fit a Picatinny (MIL-STD-1913) rail?
Yes. Weaver-style rings are generally compatible with Picatinny rails because Picatinny slots share a similar cross-slot layout. However, Picatinny slots are slightly wider and more precisely spaced than traditional Weaver slots. In most cases, the Warne Maxima rings will seat properly on a Picatinny rail, but fitment can vary slightly depending on the specific rail manufacturer. For guaranteed compatibility, confirm your base or rail is Weaver-spec before purchase.
What scopes are compatible with 1" high-profile rings?
These rings are designed for any riflescope with a 1-inch (25.4mm) main tube diameter. The high-profile height is best suited for scopes with larger objective lenses — typically 44mm and above — or rifles with higher bore axes such as semi-automatic platforms. If you have a smaller objective lens (40mm or under), a medium or low ring may provide a more optimal cheek weld and eye alignment.
Do I need any special tools to install Warne Maxima rings?
Installation requires a Torx T-15 driver, which is widely available at hardware and sporting goods stores. Warne recommends torquing the four socket cap screws to 25 in/lb for a secure hold without over-tightening. Using a quality torque wrench or screwdriver with an in/lb setting is strongly recommended to protect both your scope and rings during installation.
